Back then, the process of carpet cleaning Bolingbrook was not as innovative as we have today. Before the existence of steam carpet cleaners Bolingbrook, the process used before involves traditional method such as vacuuming, shampooing and other steam-carpet cleaning techniques such as bonnet clean methods. However, these techniques of cleaning carpets only make the surface of the material ‘look clean’ on the outside but not efficiently clean on the inside. In doesn’t do much good in ‘deep cleaning’, thus leaving the some deep-seated dirt and dust on the surface material. Though it can make the carpet look clean and tidy, but the quality of the carpet’s material was being sacrificed.
To efficiently make sure that the carpets are thoroughly cleaned and dirt-free, steam carpet cleaning has been developed. Steam carpet cleaning Bolingbrook, or also called as ‘vapor cleaning’ is a steam vapor sanitation system that sprays heated water (sometimes with added chemicals for cleaning) on the carpet to remove deep-seated dirt, mold, mildew, grime and dust from all kinds. Other than removing dirt and dust embedded deeply on the carpet surface, steam carpet cleaning also kills bacteria and viruses that very sensitive to allergens. In steam carpet cleaning, the water used in the vapor cleaning method was being heated in a machine boiler with a temperature of 300°F to form a low moisture steam vapor (4-6% water).
The water subsequently boils down to about 215°F to 230°F as the vapor is being applied. The steam’s ability to clean up the most intricate and hard-to-reach surface is primarily because of its heat. Unlike the other form of carpet cleaning method such as vacuuming or bonnet, steam carpet cleaners uses ‘dry’ stream to loosen up all the dirt and contaminants and as well as to disinfect the surface. Simultaneously, the vapor or steam is being vacuumed up along with all those dissolved and dislodged dirt. The steam is being applied using variety of insulated equipment and accessories, thereby safely removing and breaking soil bonds and releases the contaminants into the water suspension, after being removed through vacuuming or wiping.
The process only use very little water which is measured in liters or quarters/pounds compared to other carpet cleaning method which uses liters or gallons/minute. The inherently low moisture temperature of vapor steam is what makes them suitable in removing the toughest dirt stuck in the surface. Due to its efficiency in “tough-cleaning”, steam carpet cleaning are being used my many high-end industrial buildings, factory and other business facility where dirt and dust are greatly involved. Steam carpet cleaning are considered as one of the ‘green cleaning solution’ available today since they do not require large amount of carpet cleaning chemicals for the cleaning process.
Many steam cleaners uses truck-mount vacuum machine to extricate and remove the soil, dirt and other grimes on the carpet. Some also use a portable vacuum machine which can be carried over office or residential homes. This kind of truck-mounted equipment does not allow the dirty air to ‘recirculate’ around the home, thus, safely cleaning your area thoroughly.